Elka 2.5 Ifp Front & Rear Kit Shocks Toyota TACOMA 4x4 2005-2023 (90171)

Elka 2.5 Ifp Front & Rear Kit Shocks Toyota TACOMA 4x4 2005-2023 (90171)

Tuned for balanced on-road manners and confident off-road control without compromising daily drivability.

Why This Setup Matters

• Improved on-road control
• Confidence off pavement
• Balanced ride quality
• Daily-driver friendly tuning

Full Specifications

• Shock Model: Elka 2.5 Ifp
• Position: Front & Rear Kit
• Shock Type: Coilover (Fr) + Non-Coilover (Rr)
• Body: 56mm, ALUM.
• Reservoir: Int. Float. Piston
• Adjustments:
  • Preload (front only)
• Unit of sale: KIT (4 SHOCKS)
• SKU: 90171

Application

Fits Toyota TACOMA 4x4 models 2005-2023. Designed for daily driving / oe replacement use.

What’s Included

• Two (2) Elka 2.5 Ifp Front & Rear Kit shocks
• Installed springs (where applicable)
• Manufacturer documentation

Why Buy Elka From iShock

• Official Elka USA Service & Warranty Center
• Authorized to rebuild, repair, and re-valve Elka shocks in-house
• Direct, ongoing collaboration with Elka engineers and R&D
• Setup guidance for terrain, load, and riding style
• Decades-long working relationship with Elka Suspension

When you buy Elka from iShock, you’re buying from the company trusted by Elka to support their products in the United States — before and after the sale. No other dealer offers this level of factory-backed access, service capability, and real-world expertise.

iShock Setup Notes

Stage p is a strong upgrade when you want the quad to track straighter, soak up chatter, and stay planted in rough sections. Tell us your load and terrain and we’ll steer you to the right settings.

Technical Details

Elka 2.5 Ifp shocks are built to hold consistent damping under heat and repeated hits, using high-quality internals and a durable aluminum body. The remote reservoir design helps manage temperature during sustained aggressive riding, and the adjusters let you dial in ride feel without guesswork.

Quick take: The 2.5 IFP model is a simple bolt-on upgrade over OEM shocks. They are a gas-pressurized design with internal floating piston to help prevent cavitation and fading. This configuration is for use exclusively with aftermarket lift kits or upper control arms to accommodate between 2 in. to 3 in. of lift. Ride height is preset from our factory at approximately 2.5 in. of lift at the front for most setups, actual ride height may vary depending on wheels dimensions and lift kit or upper control arms used. Ride height at the rear is not affected by the installation of these shocks. Package includes four (4) position-specific shocks:

• Two (2) 2.5 IFP Coilover front shocks
• Two (2) 2.5 IFP rear shocks

• Spring Preload (front only)