Dirt King Performance Lower Control Arms - DK-815904

To improve the off road handling the Dirt King lower control arms have additional tabbing to accommodate for bump stops, limit straps, and bypasses. They still accept the factory sway bar and work with any shocks that are compatible with the factory arms. The outer pivots utilize FK 1 stainless steel uniballs for strength and additional articulation. High grade 17-4 stainless steel misalignment spacers and grade 8 mounting hardware is supplied to attach the lower arms to the spindles. Progressive steering stops are used to limit the steering throughout the suspension cycle allowing for maximum steering without over articulating the CV's or tie rods.

Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, uniballs, and poly bushings. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, uniballs are more maintenance and higher cost to replace, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise.

This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.

Specifications Track Width: Stock Maximum Tire Size: 35” Maximum Backspacing: 4.75” Minimum Rim Size: 17” Compatible with factory sway bar: Yes Bump Stop Size: 2.0 x 2.0 Coil Over Shock Size: OEM replacement coil overs Tire Info If installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance.

What's Included Boxed plate lower control arms Delrin bushings Grease fittings 1” FK uniballs Brushed stainless steel logo plates 17-4 stainless steel misalignment spacers Grade 8 mounting hardware Zinc plated inner bushing sleeves Zinc plated bump stop spacers Durable black powder coat finish Dirt King sticker pack Installation instructions Features CAD designed Formed steel bushing gussets Internally ribbed with extrusions for weight reduction Preassembled for fast installation Grease fitting ports for easy servicing Zinc plated components for corrosion resistance Bump stop plating Limit strap tabbing Bypass shock tabbing Professionally MIG welded Proudly made in the USA

• CAD designed
• Formed steel bushing gussets
• Internally ribbed with extrusions for weight reduction
• Preassembled for fast installation
• Grease fitting ports for easy servicing
• Zinc plated components for corrosion resistance
• Bump stop plating
• Limit strap tabbing
• Bypass shock tabbing
• Professionally MIG welded
• Proudly made in the USA

• Boxed plate lower control arms
• Delrin bushings
• Grease fittings
• 1” FK uniballs
• Brushed stainless steel logo plates
• 17-4 stainless steel misalignment spacers
• Grade 8 mounting hardware
• Zinc plated inner bushing sleeves
• Zinc plated bump stop spacers
• Durable black powder coat finish
• Dirt King sticker pack

Tire Info: If installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance.

To improve the off road handling the Dirt King lower control arms have additional tabbing to accommodate for bump stops, limit straps, and bypasses. They still accept the factory sway bar and work with any shocks that are compatible with the factory arms. The outer pivots utilize FK 1 stainless steel uniballs for strength and additional articulation. High grade 17-4 stainless steel misalignment spacers and grade 8 mounting hardware is supplied to attach the lower arms to the spindles. Progressive steering stops are used to limit the steering throughout the suspension cycle allowing for maximum steering without over articulating the CV's or tie rods.