Elka
Additional Images

Elka 2.5 RESERVOIR FRONT & REAR SHOCKS KIT for FORD F-250 4x4, 2017 to 2019 - 90082

2.5 RESERVOIR|FORD|Road & Trails Dual Purpose

90082

The 2.5 RESERVOIR model features an external reservoir with increased oil volume for cooler operating temperature, providing better performance and consistency. These shocks are a good performance upgrade over OEM shocks. This configuration is optimized for use with stock geometry or can be used with lift kits between 0 in. to 3 in. that use stock length shocks (with or without relocator brackets). Ride height is not affected by the installation of these shocks. Package includes four (4) position-specific shocks:

  • Two (2) 2.5 RESERVOIR front shocks
  • Two (2) 2.5 PIGGYBACK rear shocks
 

Description

Increase the off-road capabilities while improving the comfort and handling of your F-250

The 2.5 RESERVOIR shocks provide the optimal combination of:
  • Firm and stable handling for driving on desert and fire roads (sports car feeling);
  • Plush compliance while off-road driving over washboard;
  • Strong ramping effect for extra bottom-out protection over large dips and washes;
  • Maximum articulation and traction for rock climbing.
BENEFITS
  • High-performance off-road capabilities
  • Improved handling and comfort for casual driving
  • Better traction
  • Provides leveling capabilities for better weight distribution
  • Increased protection against bottoming-out
RIDE ENHANCEMENTS
  • Spring setup optimized for each setup
  • Better attenuation of vibration, leading to major noise reduction in the cabin (much less squeak and rattle)
  • Damping characteristics optimized for each truck and setup, providing a smoother ride
  • Increased comfort in both on road and off-road conditions, especially over washboard and square-edge impacts
  • More stable and more predictable handling
  • Reduced front-end diving when cornering or braking
  • Reduced rear-end bucking and lifting
  • Increased damping and spring rate for better handling when towing or loading truck
TECHNICAL FEATURES
  • Massive 2.5 in. (56mm) hard-anodized aluminum body for cooler operation
  • Big bore design with less restricted oil flow for increased responsiveness and less fading
  • Internal hydraulic valving optimized for each vehicle platform
  • Built from CNC-machined and forged aluminum parts, aluminum bodies and premium-quality internal components
  • External remote reservoir with low-friction floating piston (1:1 ratio vs. main piston) providing additional cooling
  • DOT high-flow reservoir hose
  • Heavy-duty 7/8 in. (22mm) induction-hardened shaft
  • Triple sealing system with dust wiper, high-pressure step-seal and premium quality o-ring
  • Direct, bolt-on replacement that uses stock shocks location
  • Proprietary ultra-low friction, light viscosity semi-synthetic oil blend, ultra-resistant to high operating temperature
  • Coilover models use Elka's durable high-tensile alloy springs or Eibach springs (depending on model & configuration)
  • Fully rebuildable using affordable replacements parts and springs, multiple replacement valving shim stacks available

Shipping Information

  • Item Requires Shipping
  • 70.0 lbs.
  • W12.0000” x H24.0000” x L40.0000”
  • FREE SHIPPING